What are the safety specifications for booth construction?

　　What are the safety specifications for booth construction:Safety is very important in booth construction,not only to ensure the safety of each link of booth construction,but also to ensure the safety of personnel in the process of booth construction.Booth construction companies have clear safety specifications,mainly as follows:

　　First,leave a safe passage of sufficient width

　　When designing the booth,be sure to ensure that the safety channel is wide enough,and in addition,the design of the safety channel must be smooth and straight,and do not use curved and curved channels.Another point is that the safety passage should not have a difference in width and height,and should form a two-way evacuation function and circulate as much as possible.Because it is generally difficult for people to make accurate judgments in the event of an emergency,it is important to ensure the direction of evacuation in both directions and circular.

　　Second,security facilities should be available

　　When designing the booth,first of all,it is necessary to ensure the comprehensiveness of the safety facilities,and the packaging function is functional,such as safety doors,roller shutter doors,fire boxes and other safety facilities must be provided.The installation of safety doors in exhibition passages and halls should be simple,and fire fighting equipment should ensure that they can be opened quickly in an emergency.

　　Third,how to eliminate potential security hazards

　　1.Popularize fire safety knowledge to exhibition personnel in advance,and be sure to master the fire fighting skills of post operation.

　　2.Regularly inspect and repair fire fighting equipment and facilities to ensure that they are intact.

　　3.There must be a special person on duty throughout the exhibition,and if the signs of an accident are found,it must be stopped in time,especially the safety of electricity,and it must be strictly controlled.

　　4.The temporary power line should also be fixed,the installation of lamps should be reasonable,and all booths should not be connected to the power supply without permission.

　　5.On-site management must be strengthened in the layout of the exhibition,and all exhibitors'power supply and lighting equipment must be supervised by special personnel.

　　6.Only electrician qualified personnel can enter the site to operate.

　　7.When working at height,the construction personnel must wear seat belts.

　　8.The structure of the raw space booth must ensure a reasonable design to ensure the firmness and safety of the construction.

　　In short,safety in the booth design is the first,and then consider the aesthetics,every exhibitor must have safety awareness,so that the whole exhibition is very smooth.

　　What are the safety protections that should be taken during the construction of the booth?

　　1.Before construction,a detailed construction plan and construction plan should be formulated according to the booth design drawings,and reported to the exhibition venue management department for approval.

　　2.During the construction process,the construction personnel must wear safety helmets and non-slip shoes,and it is strictly forbidden to work by dangerous means such as walking steel plates.

　　3.The main structure of the booth should be made of suitable materials,and correct construction techniques and tools should be used to ensure that the structure is firm,stable,horizontal and stable,and deformation and tilting are strictly prohibited.

　　4.Electrical facilities and electrical equipment should comply with national standards,and install,use and maintain in strict accordance with the specified electrical safety operating procedures and operational requirements.

　　5.Lighting facilities should meet national standards,wires and cables should comply with relevant regulations,lighting equipment and bulbs should meet the requirements of the venue,and prevent leakage and overload.

　　6.It is forbidden to pile materials and items on the booth,and keep the inside and outside of the booth clean and tidy.

　　7.After the construction is completed,the site should be cleaned up in time to keep it neat and clean.At the same time,the overall safety of the booth should be ensured,without obvious defects and hidden dangers.

　　8.The exhibition hall management department and safety supervision departments at all levels should regularly check the construction quality and safety status of the booth,and timely discover and check various potential safety hazards.

　　What are the safety issues that need to be considered for booth construction?

　　According to Article 3 of the Regulations on the Administration of Safety Technology Training and Assessment of Special Operations Personnel,"Special operations refer to operations that are prone to accidents and may cause major harm to the safety and health of the operator and others and the safety of equipment and facilities."The scope of special operations is specified by the special operations catalog.”

　　1,entering the construction should pay attention to the safety issues:the construction site is inevitable bumps,personal protection is the last line of defense,hard hats,dust masks,protective eye shields,protective gloves and reflective vests are basic equipment,such as some work noise,but also need to be equipped with earplugs.

　　2,the problem that should be paid attention to when working at height:working at height,the seat belt is the guarantee of life,remember not to be careless,when using the seat belt,you should check in advance whether the parts of the seat belt are intact,pay attention to high hanging and low use when using,and do not hang the seat belt on the moving object.

　　3,the safety of electricity should be paid attention to:electrical work industry involves low voltage,high voltage,power cable and other operations,booth construction is mostly temporary electricity,the most common is the use of mobile and handheld power tools,many workers temporary transfer operations,if you forget the leakage protection,forget the separate switch,the accident may be"touched".

　　According to the relevant requirements of GB50194-2014"Safety Regulations for Power Supply and Consumption at Construction Sites of Construction Projects"and JGJ46-2005"Technical Specifications for Temporary Electricity Use at Construction Sites",each electrical equipment must have its own dedicated switch box,and it is strictly forbidden for the same switch box to directly control two or more electrical equipment(including sockets).The switch box must be equipped with disconnectors,circuit breakers or fuses,and leakage protectors

　　Safety measures that can be taken for booth construction:

　　First,setting up a kiosk to ensure security is a basic requirement.First of all,it is necessary to ensure the sturdiness of the booth.Especially for booths with a certain height,pay attention to whether they are particularly stable to prevent accidents to the staff and participants in the exhibition due to loose structure.If there is a problem with the construction of a display stand in the exhibition hall,if an accident occurs in which the audience is injured,it will cause unnecessary trouble to the enterprise.On the one hand,it affects the mood of the exhibitor and poses a threat to safety,and on the other hand,it has some damage to the corporate image.

　　Secondly,safety management measures:when the booth design is unique and beautiful,safety hazards need to be paid more attention to!Exhibitors expect their booth design to have an unusual and unexpected role,so that the booth design in modern exhibitions and even the exhibition itself have entered an era of standardized construction.

　　Third,whether it is an independent booth design or a display wall with a relatively large span,the strength of each component and the connection between the components and the balance between various forces need to be given very standardized safety.The structural balance and stability of the system components in handling the booth design can help exhibition builders save a lot of inconvenience.

　　In short,the safety problem in the construction process must not be ignored,once the safety problem is very serious,it is also very important to protect the safety of construction personnel,the exhibition will not only not be successful but may also endanger life safety.

　　The safety issues in the process of exhibition development should also be taken into account,and the characteristics of dense personnel and mobility on the day of the exhibition should definitely be considered,and the overall structure of the booth should be firm and stable,especially the materials used in fire safety should not only be green and environmentally friendly,but also consider the use of fireproof materials.